Figure 3-10: Typical Installation Diagram (With External Antenna) - Radwin WinLink 1000 Series User Manual

Hardware Installation Sequence
1. Mounting the ODUs, page
2. Mounting the external antennas (if used), page
3. Mounting the Lightning Protection devices (if used), page
4. Outdoor connections, page
5. Mounting the IDUs, page
6. Indoor connections, page
7. Aligning the ODUs/antennas, page
See Figure 3-10
1000 with an external antenna.

Figure 3-10: Typical Installation Diagram (with external antenna)

The installation steps are detailed in the following sections.
WinLink™ 1000 User Manual
page 3-8.
page 3-9.
page 3-10.
page 3-14.
page
below, which illustrates a typical installation of WinLink™
Release 1.9
Chapter 3
page 3-8.
page
3-15.
3-9.
3-7