Robot Manger] Configuration; Overview Of [Robot Manager] - Epson RC700 Manual

3. Software
3.3 [Robot Manager] Configuration
After the PG robot parameter configuration is completed, now you need to set the
parameters in the [Robot Manager].

3.3.1 Overview of [Robot Manager]

This is used to control the robot motors and power, jog robots, teach points, and view/edit
severeal parameters for the robot.
For the details, refer to EPSON RC+ Users Guide: 5.11.1 [Robot Manager Command]
(Tools Menu).
This section describes an instruction for the PG robot parameter setting.
How to edit the [Robot Manager]
32
(1) Start the EPSON RC+.
(2) Select the Robot Manager from the Tools menu.
(3) Follow the instruction in the section 3.3.2 [Range] or later to change the
parameters.
(4) Click the <Apply> button and save the new settings.
RC700 / RC90 option PG motion system Rev.2