Epson RC700 Manual page 9

Control System Configuration
This option is used with the following combinations of Controllers and software.
TYPE A:
TYPE B: Robot Controller RC90 with the following label attached.
OK: Compatible All functions of the EPSON RC+ 7.0 and the Controller are
!!!: Compatible
NOTE

This option is not available for Robot Controller RC90 (EPSON RC+ 5.0) without the
label.
NOTE

Manual PDF for TYPE B is available from EPSON RC+ 7.0 Ver. 7.0.2
RC700 / RC90 Option PG Motion System Rev.2
Controller
RC700 EPSON RC+ 7.0
Label
Before Ver.7.0.1
EPSON RC+ 7.0
Ver.7.0.2 or later
available.
Connection is OK. We recommend using EPSON RC+7.0 Ver.
7.0.2 or later.
Software
Controller
RC90
Software
EPSON RC+ 7.0
RC90 controller firmware
Ver.7.0.2.0
!!!
OK
vii