1.4
Opening the information level
At the normal switch position
tion periods as well as the temperatures measured by the connected sensors and their set points
can be retrieved and displayed.
Note: Data can also be viewed in the operating level
To do so, select Info, confirm and proceed as described below.
Proceed as follows:
1.
Select value [q].
Depending on the configuration of the controller, the current values of the following
data points are displayed one after the other:
__:__
Time
Room temperature, heating circuits 1, 2
Outdoor temperature
Temperature at flow sensor VF, heating circuits 1, 2
Temperature at flow sensor VF1, primary heat exchanger circuit
Temperature at flow sensor VF2, VF4, DHW circuit
Temperature at solar collector sensor VF3
Temperature at return flow sensor RüF
Temperature at storage tank sensor SF1
Temperature at storage tank sensor SF2
Temperature at storage tank sensor of the solar circuit
2.
By confirming a data point [ ] its set point/limit is displayed. When the time is indicated
on the display, the date appears on pressing the rotary pushbutton.
(information level), the time, date, public holidays and vaca-
(manual mode).
Operation
9
EB 5573 EN