Setting The Controller Time - Samson TROVIS 5573 Mounting And Operating Instructions

Operation
1.5

Setting the controller time

The current time and date need to be set immediately after start-up and after a power failure of
more than 24 hours has occurred. This is the case when the time blinks on the display.
Proceed as follows:
10
EB 5573 EN
1. Turn the rotary switch to
Display: time,
2. Edit the controller time [q].
3. Confirm the adjusted time [ ].
Display: year
4. Edit the year [q].
5. Confirm the adjusted year [ ].
Display: date (day.month)
6. Edit the date [q].
7. Confirm the adjusted date [ ].
Display: time
8. Return the rotary switch to normal switch position
(information level).
(controller time).
and blink.