Information Level; Activating Parameters - Samson 3374-10 Mounting And Operating Instructions

Information level

10 Information level
In the information level, all the actuator data important for closed-loop operation are dis-
played. Codes of the information level have an 'i' prefix to identify them.
All the parameters of the information level are listed in section 17.2.4 on page 88.

10.1 Activating parameters

Activate the information level
1. Turn (when the start screen appears) to select Code 11.
2. Press to activate the information level.
(display: i01).
Activating parameters
Î Turn to activate the required code.
In this example:
Code i01, Lower range value of input signal (the
stands for the mA unit).
Exit information level
1. Turn to select the code i00 (ESC).
2. Press to exit information level.
66
icon
EB 8331-4 EN