Table of Contents
Advertisement
Operational faults
controller to dial the control system. You can define which error messages are to influence the
error status register after entering the key number 0025. The default setting of 465 results in just
the error messages highlighted in the table (bold) causing a change in state of the error status
register.
Error message
Err 1
Err 2
Err 3
Err 4
Err 5
Err 6
Err 7
Err 8
Err 9
Example: Value of error status register when a sensor fails and
8.5
Sending text messages in case of error
If a dial-up modem is connected to RS-232/modem communications module (-> section 9.1),
the controller can send a text message to a mobile phone when an error occurs.
As soon as a fault has been registered in the error status register, the text message indicating a
controller fault is sent. On the mobile phone, the following error message is displayed:
80
EB 5573 EN
Meaning
Sensor failure
–
Disinfection temperature not reached
Max. charging temperature reached
–
Temperature monitoring alarm
Unauthorized access occurred
–
–
Default setting range after entering the key number 0025 =
[Date]
[Phone no. of the controller]
Controller fault
TROVIS 5573 # [controller ID of the faulty controller]
Decimal value
a temperature monitoring alarm=
[Time]
1
1
2
4
8
16
16
32
64
64
128
128
256
256
Total
465
1
32
Total
33
Hide quick links:
Advertisement
Table of Contents
