Operation
1
Operation
The controller is ready for use with the default temperatures and operating schedules.
On start-up, the current time and date need to be set at the controller (–> section 1.5).
1.1
Operating controls
The operating controls are located in the front panel of the controller.
1.1.1 Rotary pushbutton
–
*
1.1.2 Rotary switch
The rotary switch is used to set the operating mode and the relevant parameters for each control
circuit.
6
EB 5573 EN
Rotary pushbutton
+
Turn [q]:
Display, select parameters and function blocks
Press [ ]:
Confirm adjusted selection or settings
Information level, rotary switch in normal position
Operating modes
Manual level
Day set point (rated room temperature)
Night set point (reduced room temperature)
Times-of-use for heating/DHW
Party mode
Controller time
Configuration and parameter level