Activating And Deactivating Functions - Samson TROVIS 5573 Mounting And Operating Instructions

2.2

Activating and deactivating functions

A function is activated or deactivated in the associated function block. The numbers 0 to 24 in
the top row of the display represent the respective function block numbers. When a configura-
tion level is opened, the activated function blocks are indicated by a black square on the
right-hand side below the function block number. For more details on function blocks, refer to
section 12.1.
The functions are grouped by topics:
4
CO1: Rk1 (Heating circuit 1)
4
CO2: Rk2 (Heating circuit 2)
4
CO3: Not applicable
4
CO4: DHW circuit
4
CO5: System-wide functions
4
CO6: Modbus communication
1. Turn the rotary switch to
Display: 0 0 0 0
2. Set valid key number [q].
3. Confirm key number [ ].
Display: PA_
4. Select configuration level [q].
5. Open configuration level [ ].
6. Select function block [q].
Activated function blocks are marked by "- 1".
Deactivated function blocks are marked by "- 0".
7. Activate editing mode for the function block [ ].
blinks.
8. Activate the function block [q].
Display: F__ - 1
An activated function block is indicated by a black square below (right) the function
block number in the top row of the controller display.
or:
Deactivate the function block [q].
Display: F__ - 0
(configuration and parameter level).
Start-up
21
EB 5573 EN