Setting The Current Time And Date - Samson TROVIS 5432 Mounting And Operating Instructions

Setting options on the user level

5.1 Setting the current time and date

A time appears in the display or, if the controller has not been in operation for the past 72
hours, the default setting 10:00 appears in the display.
You only need to change the time and date, if they are different from the time and date en-
tered during start-up.
12
EB 5432-1 EN
Press the control knob. The clock symbol starts to blink.
Turn the control knob to until you reach the correct time
and press the knob to acknowledge the time.
The year 2001 appears in the display as the default setting.
Turn the control knob if you want to change the year and
press the knob to acknowledge the year.
The date (day and month) appear in the display as the de-
fault setting.
Turn the control knob to set the date and press the knob to
acknowledge the date.
You have now completed entering the time and date. The
time, date and the clock symbol reappear in the display.
If you want to remain on the user level, you can now enter
the times-of-use (chapter 5.2) by turning the control knob
one position further.
If you do not want to continue, turn the control knob until
End appears in the display. Then press the knob to access
the display level.
Alternatively, if you wait five minutes, the controller auto-
matically returns to the display level.