Setting The Controller Time - Samson TROVIS 5433 Mounting And Operating Instructions

Operation
1.5

Setting the controller time

The current time and date need to be set immediately after start-up or after a power failure
lasting more than 24 hours. This is the case when the time blinks on the display.
Proceed as follows:
10
EB 5433 EN
Turn rotary switch "Configuration and
parameterization" to data point
Display shows: time
Activate editing mode for controller time.
blinks.
q
Edit time.
Confirm time.
Display shows: date (day.month)
The individual week days which are represented by
black squares below the row of numbers can be read
off at the top of the display:
1 = Monday, 2 = Tuesday, ..., 5 = Friday (shown here)
Activate editing mode for date.
blinks.
q
Edit date.
Confirm date.
Display shows: year
Activate editing mode for year.
blinks.
q
Edit year.
Confirm year.
Display shows: time
Return rotary switch "Configuration and
parameterization" to INFO.
Display shows: time
"Controller time".