Mitsubishi Electric M80 Series Maintenance Manual page 152

M800/M80/E80 Series Maintenance Manual
4 Failure Diagnosis
Procedures to output the history data files
(1) Select [Mainte]-[I/O].
(2) Set the files of device A as follows:
A:Dev: Memory
Directory: /LOG (Displayed as "History".)
File name: ALLLOG.LOG (all history), KEYLOG.LOG (key history), TOUCHLOG.LOG (touchscreen history)
<Note>
Even if the menu [List update] is executed, ALLLOG.LOG, KEYLOG.LOG or TOUCHLOG.LOG is not displayed in
the list.
(3) Press the menu [Area change] to set the destination of the device B file.
(In this manual, the destination is HD (D :/NCFILE) as an example.)
B: Dev: HD
Directory: Select a destination directory.
File name: Input a file name to save.
<Note>
If you omit the file name, the file is named with the same name as the device A.
(4) Press the menu [Trnsfr A→B] to output the file.
S1008 1500303321Y8E0 1
S1008 1500304628Y8E1 1
S1008 1500305826Y8E2 1
E1008 15003062131 S01 0053 XYZCA
S1008 1501307211Y700 1
S1008 1502307544Y701 1
S1008 1502307544Y702+ 1
K1008 1503308634004F 0
125 IB-1501273-F