M800/M80/E80 Series Maintenance Manual
6 Replacing Each Unit
6.12 USB memory
Replacement of front-side USB memory
(1) Open the upper cover on the display unit right end.
(2) Insert/remove the USB memory.
Replacement of back-side USB memory
Always replace the back-side USB memory with the machine power turned OFF.
(1) Check that the machine power is turned OFF.
(2) Open the electric cabinet door.
(3) Insert/remove the USB memory.
(4) Close the electric cabinet door.
Note
(1) Do not remove a USB memory during the data reading/writing.
(2) Do not connect devices other than USB memories. When using a commercially available USB memory, performance
check must be made by MTB.
IB-1501273-F
174