M800/M80/E80 Series Maintenance Manual
1 System Basic Configuration
Note
(1) When only any of the following alarms occur, LED shows the normal indication.
Emergency stop EXIN
Emergency stop WAIT
M01 Cutting block start interlock 0110
M01 In synchronous correction mode 0120
[Display of the 7-segment LEDs and their meanings]
Alarm code for the first time
Left side LED
Alarm/warning
Operation error
Stop code
Emergency stop
Program error
System alarm/waring
MCP alarm/waring
Servo alarm/waring
33
IB-1501273-F