Inserting Pre-Configurations - ABB Relion 630 Series Engineering Manual

1MRS756800 F
4.6.4
630 series
Engineering Manual
• To delete the selected template, click Delete Template.
• To import a template from the selection window, click Import Template.
• To insert the selected IED to the bay, click Create.
It is possible to insert more than one IED from the Create New
Object from Template dialog box. The dialog box remains
open until Close is clicked.
5. Click Close when finished.

Inserting pre-configurations

Pre-configurations can be downloaded free of charge from the ABB Website.
Pre-configurations in PCM600 are available as *.pcmi files and include all
information that is related to the IED object in PCM600. The pre-configuration is
bound to a specific hardware configuration.
A license update tool is needed to be run to ensure that the
configuration is compatible with the ordered device.
Pre-configurations can be inserted in two alternative ways.
• Use the pre-configuration that has been ordered together with the IED.
• Create an own configuration, export the configuration as *.pcmi file and use it to
configure other IEDs.
1. Right-click the bay and select Import to select the IED configuration file
(*.pcmi) that was downloaded from the ABB Website.
Section 4
Setting up a project
45