Exporting Scl Files From Pcm600; Exporting Scd Files - ABB Relion 630 Series Engineering Manual

1MRS756800 F
7.3
7.3.1
630 series
Engineering Manual
1. SCL files are exported from PCM600. In this case, a SCD file. It is also possible
to export other SCL file types.
2. Horizontal and vertical communication is configured using the station
configuration tool, for example, IET600.
3. SCL files are imported to a PCM600 project. In this case, it is the updated SCD
file.
IET 600 (2)
create project

import SCD file

SCD file
configure d ata sets

configure Report CBs

configure GOOSE CBs

export SCD file

PCM 600 (1)
do IED engineering

export SCD file

GUID-5096E041-8757-49F2-BB8D-D02B6222C359 V1 EN
Figure 77: IEC 61850: Signal engineering procedure flow

Exporting SCL files from PCM600

A pre-condition is that all IEDs in the project must be engineered in PCM600. The
hardware interface, for example the communication port, has to be selected and
configured. The used interface addresses have to be set according to protocol and
project definitions. The station communication port has to be activated in the IED, that
is to set the IEC61850-8-1Operation setting to "On".

Exporting SCD files

1. Select the station in the plant structure.
IEC 61850 communication engineering
SCD file
PCM 600 (3)
import SCD file

link GOOSE input data

Write to IED

IED 1 IED 2 IED n - 1
Section 7
IED n
105