ABB Relion 630 Series Engineering Manual page 24

Section 2
Relay engineering process
18
See PCM600 documentation for the recommended size of a
project. Larger projects can be divided into several PCM600
projects.
• Protection relays can be added to the plant structure by inserting the IED in online
mode in which the configuration is read from the physical protection relay, by
inserting an IED in offline mode, by importing a *.pcmi file or by selecting an
IED template from the template library (*.pcmt).
The reading of IEC 61850 communication configuration is not
supported when reading a configuration from an online IED.
• IED objects are uniquely named within the PCM600 project.
Application configuration in the Application Configuration tool
• Protection and control functions can be configured as needed.
• The configuration made in the Application Configuration tool is saved to make
the interfaces and signals available for other engineering tools within PCM600,
for example, for the Parameter Setting tool.
Parameter setting and configuration in the Parameter Setting tool
• Configuration parameters such as CT and VT conversion values of the
transformer module are checked by the tool.
• If needed, the setting values are checked and adjusted with the Parameter Setting
tool.
Single-line diagram configuration in Graphical Display Editor
• It is possible to create a single-line diagram for the switching devices in the bay.
• Measurements can be included when needed.
• The dynamic elements are linked to the functions created in the Application
Configuration tool; for example, a breaker object is linked to the circuit breaker
control function.
LHMI engineering
• Function blocks for LHMI element groups, LEDs and Function keys are
configured with Application Configuration.
• The LED and Function key behavior is defined with Parameter Setting.
Communication protocol engineering
1MRS756800 F
630 series
Engineering Manual