1MRS756800 F
630 series
Engineering Manual
•
All colors (signals) are acknowledged and they will illuminate in steady
state.
•
Incoming additional signals with lower priority will illuminate when they
become the highest priority in steady mode.
•
One or more signals with higher priority are changing to ON after an
acknowledgement.
•
The higher priority color (signal) will illuminate in flash mode.
See
Figure 63
and
Figure 64
R
Y
G
R
Y
G
Ack
Illumination =>
= Steady
IEC08000399 V1 EN
Figure 64:
LHMI LED operation mode LatchedAck-F-S Prio / 2
LED operation mode LatchedAck-S-F
This operation mode operates exactly as the one described above (LatchedAck-F-S).
The only difference is that the illumination mode is changed. Flash mode instead of
steady mode and steady mode instead of flash mode.
LED operation mode LatchedColl-S
R
Y
G
R
Y
G
Reset LED
Illumination =>
= Steady
IEC08000402 V1 EN
Figure 65:
LHMI: LED operation mode LatchedColl-S
for these two principles.
= Flash
IEC08000399.vsd
= Flash
IEC08000402.vsd
Section 6
Local HMI engineering
87