ABB Relion 630 Series Engineering Manual page 97

1MRS756800 F
630 series
Engineering Manual
Symbol library
The symbol library window contains some panes that include drawing symbols or
elements to create a single line diagram, measurements and texts on a page. Click on
the name bar of the selected element to open the pane.
The library shows the symbols either in ANSI standard or in IEC standard. The
standard is selected by the drop down list box located on top of the display window.
When changing to the other library standard, GDE closes the library windows,
changes the symbols according to the selected new standard and redraws the single
line diagram in the display window.
Select the different panes and their symbols to become familiar with the available
symbols.
Measurements (Measurands) are presented in one format that explains itself when
selected. Select the format and drop it in the drawing area. Use the object properties
to make adaptations.
Special symbols for dynamic text
In the text pane the symbol library contains a set of special symbols to present text that
depends on the status of variables. A set of three symbols is either valid for a single bit
information or for a list of up to 32 different inputs. The corresponding function blocks
in ACT are of type VSGGIO and SLGGIO.
• Select Dynamic Text and Indication to present the text for the actual value of the
function block, see
• Click Select Button to select the value.
GUID-9DD9EEF4-5C3E-47AB-9764-9C0C2749DD85 V1 EN
Figure 69: GDE: Dynamic Text symbols
The standard (IEC or ANSI) for the symbols and the selection of the font size for the
text elements can be changed using the two selector boxes on top of the page window.
Figure 69.
Section 6
Local HMI engineering
IEC08000127.vsd
91