Inserting Ieds In Offline Mode - ABB Relion 630 Series Engineering Manual

Section 4
Setting up a project
4.6.2
38
IEC09000368 V3 EN
Figure 15: PCM600: IED Setup completion wizard
If an error is found on the Setup Complete Page, it is not possible to
go back and make modifications. If an error is detected, cancel the
insertion by clicking Cancel and insert the IED again.
When the online configuration is completed, it is advised to read the
configuration from the IED to ensure that the IED object in PCM600
has the same configuration data as the physical IED.
The reading of IEC 61850 communication configuration is not
supported when reading a configuration from an online IED.

Inserting IEDs in offline mode

When the IED is not available or is not connected to PCM600, engineering can be
done offline. The offline configuration in PCM600 can be written to the IED when it
is connected.
1MRS756800 F
630 series
Engineering Manual