1MRS756800 F
630 series
Engineering Manual
•
If the rear port is selected, type the correct IP address (of the physical IED
to be configured) to the IP address box.
Communication configuration is now defined.
IEC09000365 V2 EN
Figure 12:
PCM600: Communication port and IP address
5.
Click Next in the Configuration Wizard.
6.
Cross-check that the IED whose IP address has been inserted has been detected
online by PCM600.
If the IED is not online or the IP address is not correct, data
cannot be scanned from the IED. Also, this prevents proceeding
further.
7.
Click Scan to scan/read the IED Type and Product Version for the IED that is
online.
After a successful scan, click Next.
Setting up a project
IEC09000365-2-en.vsd
Section 4
35