Section 9
DNP3 communication engineering
9.4
134
IEC08000339-2-en.vsd
IEC08000339 V2 EN
Figure 106:
CMT: Marker to indicate changes in the container
Setting DPN3 signal parameters
Two parameters per signal can be set for all signal types:
•
The index of the signal
•
The class configuration
1.
Set the index of the signal.
1.1. Click the two inner arrows to sort signals to another index sequence or
select Set Index from the context menu to move one or a set of signals to
another array.
IEC08000336 V2 EN
Figure 107:
IEC08000363 V2 EN
Figure 108:
The selection window shows the number of signals selected.
1.2. Define the Starting index for this group and click OK.
2.
Set the class configuration.
IEC08000336-2-en.vsd
CMT: Context menu in DNP3 window
IEC08000363-2-en.vsd
CMT: Set Index menu
1MRS756800 F
630 series
Engineering Manual