Setting Technical Key - ABB Relion 630 Series Engineering Manual

Section 4
Setting up a project
4.7
48
1. Select the IED to enter the IP address.
2. Open the Object Properties window.
3. Place the cursor in the IP address row and enter the IP address.

Setting technical key

The Technical Key Editor tool is used to synchronize technical keys in the PCM600
project and in an IED. These two technical keys have to be the same in order to
communicate with the IED. The technical key has to be unique for each IED in the
project. Maximum length of the technical key is 18 characters and it can start with
character from range A-Z or a-z.
PCM600 sets technical key values for inserted IEDs based on IEC 61850 naming
conventions. The default value in the IED can be replaced either with the current value
in PCM600 or with a user-defined value. The technical key in the PCM600 project can
be edited in the IED properties panel.
The technical key property in PCM600 corresponds to the IED name
attribute in SCL files. Avoid changing the IED name attribute outside
PCM600, because data in PCM600 might be lost when importing SCL
files.
GUID-A74156F8-2CB9-48B8-9720-610450673B1B V1 EN
Figure 26: Technical key in Technical Key Editor and in properties panel
1MRS756800 F
630 series
Engineering Manual