Mircom Flex-Net Phase II Application Manual page 92

Appendix B: Using the Configurator
Restore Database
Restore database reads a database file and imports every job found there, after first deleting
all of the jobs in the current database.
Warning: When you restore from an older backup you will lose any changes that have been
made since the time of the backup.
If you choose to continue the following dialog will open. By default backups are stored in the
Backup File folder specified in the User Preferences. The backup file will have a name of the
form YYYY-MM-DD.mdb.
The backup database could have been produced by an older version of the configuration tool,
in which case all necessary conversion is performed. Conversion is sometimes necessary
when a new version of the configuration tool is released. The install program will make a
backup and instruct you to run Restore Database to convert all of your jobs.
Security Key Logon
This dialog appears if the Security Key is present when the configurator is first started. It also
appears if the key is inserted at a later time while the configurator is running.
91