Mircom Flex-Net Phase II Application Manual page 75

Connect
This dialog is displayed in response to a Panel Connect command if the job has a Dialler
component.
Select a connection type
• Direct Serial - Select this option if you have connected a serial cable directly from the
serial port (or USB / UIMIA) of your computer to the fire alarm panel.
• Modem - Select this option if the fire alarm panel is capable of being programmed
remotely. The combo-box will list the modem(s) found on your computer.
Create Job
• Enter a description for new job This name, which should be unique, will identify the job
throughout its lifetime. Note that in a multi-product environment the same job name
cannot be used for jobs of different products, even if you don't currently have access to
all possible products. An error message is displayed if the name is not unique. The error
message will help you identify duplicates that belong to other products or brands.
• Author The technician who is creating the new job. The default is automatically inserted
but can be overridden.
• Comments (Must be entered) Enter a comment. It can span multiple lines. This will
become part of the job's version history.
• Model Choose the Panel Model for your new job.
• Select Job Template After you have selected a model the list view will show only
templates jobs for the that model. The list view has the following columns.
74
• Telephone Number - Enter the phone number to which the fire alarm panel is
connected. The text field will show the last number you entered.
• Agency There are two copies of most template jobs: one for ULI and one for
ULC. The new job will be pre-configured for the chosen agency, but can be
subsequently changed.
• Description A short description of the template job. For a given combination of
Product, Agency, System Type and Language there may be more than one
template job. Each is pre-configured with different features. The Description
field summarizes the features.
Appendix B: Using the Configurator