Receiving broadcast station
It is also possible to receive them by one-touch
operations by storing up to 40 stations in the
Select the broadcasting band by pressing the TUNER FM/AM key.
The first press of the key selects the tuner
input. After this, each press switches the
broadcasting bands alternately.
Select the band. (The auto preset operation should be completed before this. ¶ )
To receive a preset station (Preset call)
Main unit operation
Every time the key (4 or ¢) is pressed, the preset
stations are switched over as follows.
Press ¢ for the order of 1=2=3 ... 38=39=40=1...
Press 4 for the order of 40=39=38 ... 3=2=1=40...
÷ When a key is held depressed, preset stations will be
skipped at an interval of about 0.5 second.
When no stations have been memorized
Select the tuning mode according to the current
radio wave condition.
When the radio wave condition is good :
Auto tuning mode (Stereo reception)
When the radio wave condition is poor :
Manual tuning mode (Monaural reception)
1Select the auto or manual tuning mode.
Each press alternates the mode.
1 Auto tuning ......... "AUTO" lit
2 Manual tuning .... "AUTO" not lit
(Normally, use the Auto tuning mode.)
(Go to step 2 within 5 seconds.)
When the "TUNER FM/AM" key is pressed,
the unit will automatically be switched on
and reception status will be reached.
Reception band indication
T U N E R
Lights at the time of automatic
T U N E R
÷ Preset stations can be called using the numeric
keys on the remote control unit.
2Tune in a station.
÷ Radio stations can also be tuned with the TUNING
(1, ¡) keys of the remote control unit.
8 9 0 0
The "TUNED" indicator lights
when a station is received.
8 9 0 0
: The next broadcasting sta-
tion will be received auto-
matically each time this key
: Press and hold until the de-
sired station is received.