Table of Contents
Advertisement
Before applying power
A Caution
: Read this page carefully to ensure safe
operation.
For the U.S.A. and Canada
For Australia and Europe
Important!
Units shipped to the U.S.A. and Canada are designed for opera-
tion on 120 volts AC only.
:
CAUTION:
TO PREVENT ELECTRIC SHOCK DO NOT USE
THE AC PLUG WITH AN EXTENSION CORD, RECEPTACLE OR
OTHER OUTLET UNLESS THE BLADES CAN BE FULLY IN-
SERTED TO PREVENT BLADE EXPOSURE.
Important!
Units shipped to Australia are designed for operation on 240 V
AC only.
Units shipped to Europe are designed for operation on 230 V
AC only.
For the United Kingdom
For other countries
Important!
Units shipped to the U.K. are designed for operation on
240 volts AC only.
The mains plug must be removed from the wall socket prior
to any internal examination.
The wires in this mains lead are coloured in accordance with
the following code:
BLS»
icc stsetvaetins
distil es ewotaean tens whe Neutra!
BrOWN
oo ...ccc cece eee cence eeeeeeeeeeees
Live
The wires in this mains lead must be connected to the termi-
nals in the plug as follows:
(>
Brown to
Live
Biue to
Neutral
~
)
Plug
Notes:
1. If a 13-amp plug is used, this must be fitted with a 5-amp
fuse.
2. If a 3-pin plug with earthing contact is used, no wire must
be connected to the E terminal.
Important!
Units shipped to countries other than the above countries are
equipped with an AC voltage selector switch on the rear panel.
Refer to the following paragraph for the proper setting of this
switch.
AC voltage selection
This unit operates on 110-120 or 220-240 volts AC. The AC
voltage selector switch Type A or Type B on the rear panel is
set to the voltage that prevails in the area to which the unit
is shipped. Before connecting the power cord to your AC out-
let, make sure that the setting position of this switch matches
your line voltage. If not, it must be set to your voltage in ac-
cordance with the following direction.
Note:
Our warranty does not cover damage caused by excessive line
voltage due to improper setting of the AC voltage selector
switch.
AC voltage selector switch
Lf
AC110V-
<4» AC220V-
120V ~
240V ~
Move switch lever to match your line voltage with
a small screwdriver or other pointed tool.
Safety precautions
TO RAIN OR MOISTURE.
RISK
OF
ELECTRIC
SHOCK
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE, REFER SER-
DU NOT OPEN
VICING TO QUALIFIED SERVICE PERSONNEL.
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE,
IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED 'DANGEROUS VOL-
TAGE" WITHIN THE PRODUCT'S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE
TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.
THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE
USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) IN-
STRUCTIONS
IN THE LITERATURE ACCOMPANYING
THE APPLIANCE.
M-85/M-959 (En) 3
Advertisement
Table of Contents
