Table of Contents
Advertisement
18
5. Serial Connector
You can use this connector to connect the device to a computer
running PC Direct or Sleepware software or to other Philips
Respironics accessories. Use the Trilogy RS232 Serial Cable to
connect the ventilator to the external device or computer.
6. Remote Alarm/Nurse Call Connector
If you are using an optional remote alarm or nurse call system
with the ventilator, you can connect the Philips Respironics
remote alarm adapter cable or nurse call adapter cable to this
connector.
7. External Battery Connector (DC Power Inlet)
You can connect an external, stand-alone lead acid battery here,
using the Trilogy External Battery cable.
8. Oxygen (O
) Inlet Connector
2
If using low flow supplemental oxygen, connect the oxygen
source to this connector using one of the O
provided with the device.
9. Air Inlet and Filter
Insert the filter supplied with the device into the air inlet.
10. Detachable Battery Pack Slot
If you are using the Philips Respironics Lithium-Ion detachable
battery pack to power the device, attach it here.
11. Cord Retainer
Secure the power cord using the cord retainer to prevent
someone from accidentally disconnecting the power cord. See
Chapter 4 for more information.
Trilogy100 clinical manual
Inlet Quick Connects
2
10
7 8
11
5
6
Rear Panel
9
Advertisement
Table of Contents
