Viewing And Changing My Settings Menu Items - PHILIPS Respironics Trilogy 100 Clinical Manual

Table of Contents

Advertisement

Viewing and Changing My Settings Menu Items

To view or change the therapy settings available on the My Settings
screen, use the Up/Down (Navigate) button to highlight the My
Settings option on the Main Menu, and press the Right (Select)
button. The My Settings Menu screen appears, shown below.
Follow the general instructions below to navigate and change any of
the therapy settings. Detailed information about each setting follows.
1. From the My Settings screen, use the Up/Down button to
navigate to the setting you want to change and highlight it.
2
To modify a setting once it is highlighted, press the Right
(Modify) button.
3. Use the Up/Down (Edit) button to scroll through the available
settings. Press Down to decrease the setting, or press Up to
increase the setting.
4. Once you have chosen the setting you want, press the Right (OK)
button to save the new setting. Or, if you decide not to change
the setting, press the Left (Cancel) button.
5. You can now either navigate to the next setting you want to
change using the Up/Down (Navigate) button, or exit the My
Settings menu by pressing the Left (Finish) button to return to
the Main Menu.
You can change the following settings in the My Settings menu, if
they are enabled by your health care professional.
Rise Time – The Rise Time is the time it takes the
ventilator to change from expiration to inspiration. If this
feature is enabled, you can adjust the Rise Time from 1
to 6 to find the setting that provides you with the most
comfort. A setting of 1 is the fastest Rise Time, while 6 is
the slowest.
Ramp Start Pressure – The ventilator is equipped
with an optional Ramp feature. Ramp reduces the
pressure and then gradually increases the pressure to
your prescription setting so you can fall asleep more
comfortably.
Note: The options on the My
Settings screen will vary depending
on how your health care
professional has set up your device.
Note: For some therapy
settings, once you reach the
highest or lowest setting
available, pressing the Up/
Down button again will cycle
back through the settings.
For the parameters that do
not wrap, when you reach
the highest or lowest setting
possible, a "Limit Reached"
message appears in the Menu
Banner on-screen.
Note: After you select "OK" to
save the new setting, the next
setting in the list is automatically
highlighted.
Note: If some features or
settings are not enabled on your
ventilator, they will not appear
on your My Settings screen. For
instance, if Ramp is not enabled,
the Ramp Start Pressure setting
does not appear on the screen.
Chapter 5 Viewing and Changing Settings
89

Advertisement

Table of Contents
loading

Table of Contents