Table of Contents
Advertisement
Connect Supplemental Oxygen (Optional)
To attach supplemental oxygen to the device:
1. Connect the oxygen tubing to the Oxygen Inlet Quick Connect.
Then, connect the Quick Connect to the Oxygen Inlet on the
back of the ventilator.
2. Make sure you press the Oxygen Inlet Quick Connect firmly into
the inlet. You should hear a click, and the latch at the top of the
inlet will pop up.
This device is only compatible with a low flow oxygen source
providing up to 15 l/min.
Oxygen Inlet
Oxygen Source
Tubing
Attaching the O
Oxygen Inlet
Quick Connect
Press Tubing in and Latch
Pops Up
Do not connect an unregulated
or high pressure oxygen source
to this connector on the device.
Chapter 4 Ventilator Setup
Tubing
2
CAUTION
57
Advertisement
Table of Contents
