Memory Maps - Omron E5 D Series Connection Manual

9.4. Memory Maps

The memory maps of this program are shown below.
9.4.1. Lists of Addresses
The tables below list the addresses necessary to execute this program.
You can change the allocations below to any addresses.
Precautions for Correct Use
Make sure that there is no duplicated address when changing the addresses.
●Input memory
The below addresses are used to operate this program.
Address Data type
5000.00 BOOL
5021 UINT
●Output memory
The execution results of the program are stored in these addresses.
Address Data type
5000.02 BOOL
5000.03 BOOL
5503 WORD
5504 WORD
5505 WORD
5506 WORD
5507 WORD
5508 WORD
H400 UINT
Variable name
Input_Start
Input_DestinationNodeNo
Variable name
Output_NormalEnd
Output_ErrorEnd
Output_Model 1_2
Output_Model 3_4
Output_Model 5_6
Output_Model 7_8
Output_Model 9_10
Output_BufferSize
Output_PMCR_ErrorCode
Description
Starts the send/receive processing when this flag
changes from OFF to ON.
Sets the node number of the Destination Device
(send destination).
Description
Turns ON when the send/receive processing ends
normally.
Turns ON when one or more of the following errors
occur.
(1) PMCR instruction error
(2) Communications error
(3) Destination Device error
Stores the model numbers 1 and 2 received from the
Destination Device.
Stores the model numbers 3 and 4 received from the
Destination Device.
Stores the model numbers 5 and 6 received from the
Destination Device.
Stores the model numbers 7 and 8 received from the
Destination Device.
Stores the model numbers 9 and 10 received from the
Destination Device.
Stores the buffer size received from the Destination
Device.
Stores the error code when a PMCR instruction error
or a communications error occurs.
9．Program
53