Omron E5 D Series Connection Manual page 44

7.4.3. Checking the Trace Data
Check that correct data is sent and received, using the trace data in CX-Protocol.
1
Select Upload Trace from the
PLC Menu in CX-Protocol.
*Once the trace data is stored,
the menu item "Upload Trace"
will be selectable.
2
The dialog box on the right is
displayed. Check the contents
and click Yes.
3
Check the receive message in
the trace data file as shown in
the figure on the right.
(In the example on the right, "45
35 43 44 2D 52 58 32 41 36" in
hexadecimal and
"E5CD-RX2A6" in string are
received as properties of the
Digital Temperature Controller.)
*The example shows that the
received data (properties of
Digital Temperature Controller)
is "E5CD-RX2A6" in string;
however, the received data
varies depending on Digital
Temperature Controller used.
7．Serial Communications Connection Procedure
First row of receive message: in string
Second row of receive message: in hexadecimal
41