Omron E5 D Series Connection Manual page 25

12
The dialog box on the right is
displayed. Confirm that there is
no problem, and click Yes.
13
Check that CX-Programmer and
PLC are online.
*The icon is pressed down
during online connection.
Additional Information
If the online connection to the PLC cannot be established, check the cable connection.
After checking the cable connection, return to step 7, check the settings described in steps 8
to 10, and try online again.
For details, refer to Connecting Directly to a CJ2 CPU Unit Using a USB Cable of the
CX-Programmer OPERATION MANUAL (Cat. No. W446).
Additional Information
Some dialog boxes described in this guide may not be displayed depending on the
environmental settings of CX-Programmer. For details on the environmental settings, refer to
Options and Preferences in CHAPTER 3 Project Reference of the CX-Programmer
OPERATION MANUAL (Cat. No. W446).
The procedures with CX-Programmer in this guide assume that the check box ''Confirm all
operations affecting the PLC'' has been selected on the PLCs Tab Page.
7．Serial Communications Connection Procedure
22