Omron E5 D Series Connection Manual page 27

3
Select Create from the Options
Menu of the PLC IO Table
Window.
The dialog box on the right is
displayed. Confirm that there is
no problem, and click Yes.
The dialog box on the right is
displayed. Confirm that there is
no problem, and click Yes.
4
The Transfer from PLC Dialog
Box is displayed.
Select IO Table and SIO Unit
Parameters.
Click Transfer.
When the transfer is completed,
the Transfer Results Dialog Box
is displayed.
Check that the transfer is
successfully completed by
referring to the message in the
dialog box.
When an I/O table is created
successfully, the dialog box
displays as follows:
Transfer Success: 1 Unit
Transfer Unsuccessful: 0 Unit
Click OK.
7．Serial Communications Connection Procedure
24