Table of Contents
Advertisement
10
Check that the network type is
set to USB in the Change PLC
Dialog Box. Click OK.
*If not, select USB from the
pull-down list.
*If you have changed the device
type in step 8 or the CPU type
in step 9, the dialog box on the
right will be displayed.
Confirm that there is no
problem, and click Yes.
Make sure that the program
has been converted normally.
("0 errors" must be shown.)
(Although the duplicated output
warnings are detected as
shown on the right, they are not
problems.)
11
Select Programs in the project
workspace.
Select Work Online from the
PLC Menu.
7．Serial Communications Connection Procedure
21
Advertisement
Table of Contents
