Omron E5 D Series Connection Manual page 57

Address Data type
H402 UINT Output_DestinationDevice
ErrorCode[0]
H403 UINT Output_DestinationDevice
ErrorCode[1]
●Internal memory
These addresses are used to operate this program only.
Address Data type
5000.01 BOOL Local_PMCRExecuting
5000.04 BOOL Local_PMCRNormalEnd
5000.05 BOOL Local_PMCRErrorEnd
5000.06 BOOL Local_DestinationDevice
Error
5000.07 BOOL Local_PMCRError
5010 UINT Local_ControlWord1
5011 UINT Local_ControlWord2
5012 UINT Local_PMCR_ErrorCode
5020 UINT Local_FirstSendWord
5500 UINT Local_FirstReceiveWord
5501 UINT Local_ResposeCode[0]
5502 UINT Local_ResposeCode[1]
Variable name
Stores the error code received from the Destination
Device when an error occurs in the Destination
Device. (CompoWay/F)
Stores the error code received from the Destination
Device when an error occurs in the Destination
Device. (FINS-mini)
Variable name
Indicates the PMCR instruction execution status.
Turns ON when the PMCR instruction is being
executed, and turns OFF when the PMCR instruction is
not executed.
Turns ON when the PMCR instruction ends normally.
Turns ON when a communications error (such as a
transmission error) occurs.
Turns ON when a Destination Device error occurs.
Turns ON when a PMCR instruction error (any of the
following three errors) occurs.
(1) Sequence number error
(2) Data read/write range error
(3) Protocol data syntax error
Execution parameter of the PMCR instruction.
Execution parameter of the PMCR instruction.
Stores the error code when a PMCR instruction error
occurs.
Sets the number of send words of the PMCR
instruction.
Stores the number of words received from the
Destination Device.
Stores the error code of the Destination Device (end
code of CompoWay/F) when a Destination Device error
occurs.
Stores the error code of the Destination Device
(MRES/SRES of FINS-mini) when a Destination Device
error occurs.
9．Program
Description
Description
54