Table of Contents
Advertisement
4
Select Monitor from the Online
Menu.
5
The Monitor Memory Areas
Dialog Box is displayed.
Select CIO and click Monitor.
6
Check received data (properties
of Digital Temperature
Controller) in the CIO Area as
shown on the right.
*In the example on the right, the
stored data starting from
CIO5503 is in hexadecimal and
is described as follows:
4535 4344 2D52 5832 4136
These values can be
expressed as a string
"E5CD-RX2A6" which is the
same as the trace data
described in step 3 of 7.4.3.
Checking the Trace Data.
*The number of words being
used (0009 in hexadecimal) is
stored in CIO5500.
The properties of Digital
Temperature Controller are
stored in the addresses from
CIO5503 to CIO5507.
*For details, refer to 9.2.2.
PMCR Instruction Operand
Settings.
7．Serial Communications Connection Procedure
43
Advertisement
Table of Contents
