Omron E5 D Series Connection Manual page 69

●Next process and error process
The next process and error process that are both set for the step are shown below.
The process set in the Next Column is executed when execution of the step ends normally.
If a communications error occurs, the process set in the Error Column is executed.
[Screenshot of the step settings]
[Settings]
Step No.
00
[Process list]
Process
End
Next
Abort
Goto
Matrix
Next process
Matrix
Ends the communications sequence.
Goes to the next step number.
Aborts the step and ends the communications sequence.
Goes to a designated step number.
Follows the next process that is set for each receive
message in the matrix.
Error process
Abort
Description
9．Program
66