Table of Contents
Advertisement
IO-Link Master with PROFINET Interface StandardLine 8 Ports IP 65 / IP 66 / IP 67
9.1.8
Firmware: Reset device to factory settings
When the IO-Link master is reset, all parameters are set to the factory settings:
To reset the device to factory settings:
► Select [Firmware] menu.
>
The menu page shows the current settings.
► Click on [Factory Reset] to reset the device.
>
LR DEVICE sets the device to the factory settings.
>
9.1.9
Firmware: Reboot the device
When rebooting the device, all settings are kept.
To restart the AL1102:
► Select [Firmware] menu.
>
The menu page shows the current settings.
► Click on [Reboot] to reboot the device.
>
LR DEVICE reboots the ifm IO-Link master.
33838
33832
31
Hide quick links:
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the IO-Link master-PROFINET AL1102 and is the answer not in the manual?