Io-Link Ports: Activate Data Transfer To The Lr Smartobserver - IFM IO-Link master-PROFINET AL1102 Operating Instructions Manual

IO-Link Master with PROFINET Interface StandardLine 8 Ports IP 65 / IP 66 / IP 67
>
9.1.5

IO-Link ports: Activate data transfer to the LR SMARTOBSERVER

The user can decide separately for each IO-Link port if the process data of the connected IO-Link
devices should be transferred to the LR SMARTOBSERVER.
To transfer process data the interfaces to the LR SMARTOBSERVER have to be correctly
configured (→
To activate / deactivate data transfer:
► Select [Port x] menu (x = 1...8).
> The menu page shows the current settings.
► Set the following parameters as required:
Name Description
[Transmission to Transfer of process data of the
LR SMARTOBSERVER] connected IO-Link device to
LR SMARTOBSERVER
► Save changed values on the device.
28
IoT: Configure the interface to the LR SMARTOBSERVER
Possible values
[Disabled] Process data is not transferred
[Enabled] Process data is transferred
33690
(→ S. 27)).