Putting Into Service; Instruction; Before Putting Into Service - HAKO Scrubmaster B120 R Operating Manual

Putting into service

3 Putting into service
3.1

Instruction

Instruction is required before the first start-up. The first-time instruction of the
machine must be provided only by a specialist of your authorised Hako dealer.
This person will be notified immediately after delivery of the machine from the
factory and will contact you to make an instruction appointment.
3.2

Before putting into service

Attention
• Before initially starting up the machine, charge the used batteries
fully and appropriately with commissioning charge. Please
observe the operating manual of the charging device and the
operating manual of the battery manufacturer. Hako assumes no
liability for battery damage resulting from insufficient
commissioning charge.
• Before the machine is initially put into service, install the
country-specific Hako mains cable.
• Check the machine for operating safety before every start-up!
Eliminate faults immediately.
• Before starting work, the operator must familiarize himself with all
equipment, operating and actuating elements as well as with their
function.
36
03-7177-00.fm