Controls At The Machine - HAKO Scrubmaster B120 R Operating Manual

Operation
2.2.2

Controls at the machine

Fig. 7:
Mains cable Fig. 7-2
The mains connection supplies voltage to the on-board charger.
Operating brake Fig. 7-13
When the accelerator pedal is released, the machine comes to a stop due to
the braking effect of the travel drive. If this braking effect is not sufficient, the
operating brake can be applied in addition.
Accelerator pedal Fig. 7-22
The accelerator pedal is used to drive forwards or reverse and continuously
adjust the speed at the same time.
Note
Set the driving direction in advance with the driving direction selection
button Fig. 5-42.
If the accelerator pedal is not actuated, it automatically returns to the zero
position and the machine stops.
Cleaning opening solution tank Fig. 7-21
The cleaning opening is used for cleaning the solution tank.
32
21
2
02-7177-00.fm
13
22