HAKO Scrubmaster B120 R Operation

Hako Scrubmaster B120 R
1
11
9
1. Disconnect mains plug of the charger and put it in front of the seat
2. Open soiled water tank lid
tank from opening
(Located next to suction hose)
3. Switch the machine on by the key switch
button 7.
4. Press green button
turbine switches on.
5. Press pedal
button 12 to adjust the water (if necessary)
NOTE! Make sure that pads / brushes are installed!!!
Qualified persons only are authorised to operate the machine!
The machine is not designed for coarse material! Floor area sweeping before!
Use only cleaning agents suitable for automatic machines! (low foaming!)
Please pay attention to the informations in the instruction manual!
OPERATION
2
4. Control the filling level by the filling level indication
8 to lower brush head
11, machine moves and brush head drive switches on. Use
3
4
5
10
and lock the lids latch
6. Actuate drive direction from
9 and squeegee
6
3. Fill the clear water
10,
2
12
7
8
1.
5.
suction