Replacing The Sealing Strips - HAKO Scrubmaster B120 R Operating Manual

Maintenance and Servicing
5.8.8

Replacing the sealing strips

Check the sealing strips Fig. 45-A at the squeegee weekly for wear and
intactness. If the used sealing edge of the sealing strip is worn or damaged,
turn or replace the sealing strip. Each sealing strip can be used four times
before it needs replacing.
C
Fig. 45:
Size 950 squeegee:
1. Pull out the suction hose Fig. 44-26.
2. Loosen the star-shaped handles Fig. 44-B and remove the squeegee.
3. Press together the protective caps Fig. 45-C and pull them out.
4. Loosen the clamping band Fig. 45-D and remove it from the catch
Fig. 44-B.
5. Pull out the aluminium body Fig. 45-E from the top.
6. Remove the sealing strips Fig. 45-A from the plastic body Fig. 45-F.
7. Before turning or replacing the sealing strips, thoroughly clean the plastic
body!
8. Assembly is in reverse order.
Size 1100 squeegee (not shown):
1. Pull out the suction hose.
2. Loosen the star-shaped handles and remove the squeegee.
3. Press together the protective caps and remove them.
4. Open and remove the inner and outer clamping bands.
5. Turn or replace the sealing strips.
6. Assembly is in reverse order.
82
B
E
A
F
D
C
05-7177-00.fm