Cleaning The Brushes; Disassembling The Brushes; Installing The Brushes - HAKO Scrubmaster B120 R Operating Manual

Maintenance and Servicing
5.8.3

Cleaning the brushes

Clean the brushes Fig. 41-C in the roller brush unit Fig. 41-23 daily or as
required.
1. Disassemble the brush, see section 5.8.4.
2. Thoroughly clean the brush under running water.
3. Install the brush, see section 5.8.5.
5.8.4

Disassembling the brushes

B
A
Fig. 43:
1. Turn off the machine.
2. Swing down the wiper, see section 5.7.1.
3. Unlock the brush holder Fig. 43-A:
Press the locking lever Fig. 43-B into position C and remove the brush
holder.
4. Pull out the brush.
5.8.5

Installing the brushes

1. Push the brush into the housing (teeth X must point to the outside) and let
the catch on the opposite side engage audibly.
2. Press the locking lever Fig. 43-B into position C and install the brush
holder.
3. Lock the brush holder:
Push the locking lever into position D.
4. Swing up the wiper, see section 5.7.1.
80
C
D
X
05-7177-00.fm