Pushing The Machine; Turning Off The Machine - HAKO Scrubmaster B120 R Operating Manual

Putting into service
3.4.8

Pushing the machine

Danger
Risk of accident! When pushing the machine, it does not have any
braking effect.
After pushing the machine, only re-start it if the lever has been
positioned and the cover installed.
A
Fig. 19:
In order to push the machine, carry out the following steps:
1. Loosen the bolts of the cover to the drive using the supplied socket wrench
and remove the cover.
2. Remove the pin Fig. 19-A from the holder and screw it into the ring
Fig. 19-B.
3. In order to unlock the parking brake, slightly pull the pin upwards and
simultaneously push the machine.
4. Disassembly is in reverse order.
3.4.9

Turning off the machine

1. Slowly bring the accelerator pedal to the zero position. The machine slows
down to standstill. A better braking effect is achieved when the machine is
slowed down by applying the brake.
2. When the machine is at standstill, the parking brake is activated audibly.
3. Switch off the cleaning functions.
4. Switch off the machine using the key switch.
Note
Remove the key when leaving the machine to prevent unauthorised
use.
46
B
C
03-7177-00.fm