Operation; Before Putting Into Service; Before Starting Up The Machine - HAKO Scrubmaster B25 Operating Manual

3 Operation

3.1

Before putting into service

Attention
• Before initially starting up the machine, charge the used batteries
fully and appropriately with commissioning charge. Hako
assumes no liability for battery damage resulting from insufficient
commissioning charge.
• Check the machine for operating safety before every start-up!
Eliminate faults immediately.
• Before starting work, operators must familiarise themselves with
all equipment, operating and actuating elements as well as with
their function!
3.2

Before starting up the machine

1. Check the parking area for signs of leaks. Cables and tanks must not show
any sign of leaks or damage.
2. Install the brushes and squeegee, see chapter Maintenance.
3. Connect the battery if necessary, see section 2.3.6
4. Check the battery charge and recharge it as required, see chapter Mainte-
nance. Always carry out a commissioning charge before first use.
5. Adjust the operating bar, see section 2.2.2.
6. Fill the solution tank and add detergent according to the manufacturer's
specifications.
03-7155-00.fm
Operation
27