Spraying Nozzle - HAKO Scrubmaster B120 R Operating Manual

3. Use the tool operation button Fig. 17-50 on the control panel to switch the
tool on and off.
3.4.5 Spray nozzle (option)
The spray nozzle is used to flush the fresh water and waste water tank.
Fig. 18:
1. Connect the hose to the water connection of the machine Fig. 18-A.
2. Use the tool operation button Fig. 18-50 on the control panel to turn the
water supply on and off.
As the vacuum system is not required during tool operation, the turbine can
be switched off using the squeegee button Fig. 18-37.
3. Fig. 18-B = operating handle for turning the water supply with locking
mechanism on and off.
Fig. 18-C = adjusting lever for water dosing.
Fig. 18-D = setting the type of water jet.
03-7177-00.fm
5
A
Putting into service
50
D
C
B
37
43