Service Information - HAKO Scrubmaster B5 Operating Manual

5.8

Service information

In case problems occur with the machine, a four-digit service code is output in
the display panel in addition to the service indicator (tool key).
Eliminate the cause or note down the service code and inform your authorised
Hako service partner.
If the cause has been eliminated, the fault must be acknowledged via the
OFF/ON button.
Service Fault
code
1251/ Cleaning tools
1261 stop
Noise devel-
opment at the
cleaning tool
1463 Suction tur-
bine stops
1591 No water
supply
316E Power level is
faulty
05-7150-00.fm
Cause
Foreign particles block the
cleaning tools
Foreign particles or an
excessively rough floor
activate overload protec-
tion of the electronics
Cleaning tool is not posi-
tioned correctly in the
holder
• Foreign particles in the
suction turbine
• Suction turbine is
damaged
Water valve defective (no
audible click)
Solution tank not inserted
correctly
Fresh water filter clogged Clean the fresh water
Contacts on the battery
bent
Battery is not charged
Maintenance and servicing
Remedy
Inspect the cleaning
tools for foreign parti-
cles and remove them
if necessary
Turn the machine off,
wait 5 minutes if neces-
sary and then restart it.
Avoid an excessively
rough floor.
Insert the cleaning tool
correctly, contact the
customer service if nec-
essary
Contact the customer
service
Contact the customer
service
Check whether the
solution tank is posi-
tioned correctly
filter, see section 5.4.3
Contact the customer
service
Charge the battery
47