Cleaning The Brushes; Decoupling The Brushes/Pads; Coupling The Brushes/Pads - HAKO Scrubmaster B120 R Operating Manual

5.6.2

Cleaning the brushes

Clean the brushes Fig. 36-B in the rotating brush unit Fig. 36-8 daily or as
required.
1. Decouple the brush, see section 5.6.3.
2. Thoroughly clean the brush under running water.
3. Couple the brush, see section 5.6.4.
Note
Make sure that the cleaned brushes are installed on the same side
in the rotating brush unit where they were removed.
5.6.3

Decoupling the brushes/pads

Fig. 38:
1. Turn off the machine.
2. Swing down the wiper, see section 5.7.1.
3. To decouple the brushes/pads, press down the brush decoupler Fig. 38-7
with your foot.
5.6.4

Coupling the brushes/pads

:
Fig. 39:
1. Make sure that the rotating brush unit has been raised and the machine has
been switched off.
2. Place the brush/pad underneath the brush head holder.
3. Raise the brush/pad and press it firmly into the holder Fig. 39.
4. Turn the brush/pad fully and use your hand to press it again until the
brush/pad has engaged completely.
05-7177-00.fm
Maintenance and Servicing
7
77